Need help?Do you have a question about the Rohde & Schwarz FSV and is the answer not in the manual?
General| Resolution Bandwidth | 1 Hz to 10 MHz |
|---|---|
| Dynamic Range | > 100 dB |
| Video Bandwidth (VBW) | 1 Hz to 10 MHz |
| Maximum Input Level | +30 dBm |
| Analysis Bandwidth | Up to 40 MHz |
| Displayed Average Noise Level (DANL) | -155 dBm (1 Hz) |
| Amplitude Accuracy | ±0.3 dB |
| Interfaces | LAN, USB, GPIB |
| Input VSWR | < 1.5:1 |
| Input Impedance | 50 Ohm |
Essential instructions for preventing electric shock, fire, and injury during operation.
Guidelines for correct product usage environment, placement, and operating conditions.
Instructions for responsible disposal of the product and its components.
Introduction to the instrument, setup, basic operations, and safety.
Information on obtaining and using detailed operating manuals and help systems.
Contains essential safety instructions, operating conditions, and important information.
Description of the instrument's front panel layout, keys, and connectors.
Details of all available connectors and interfaces on the front panel.
Description of the instrument's rear panel layout and connectors.
Steps for initial setup, instrument unpacking, and basic configuration.
Procedure for removing the instrument from packaging and verifying contents.
Procedure for connecting the instrument to a power source.
Instructions for safely powering the instrument on and off.
Explanation of the screen layout, measurement results, and status information.
Details on using touchscreen, keypad, softkeys, and other controls.
Guidance on entering and adjusting instrument parameters.
Step-by-step example for measuring signal level and frequency.
Examples of measuring burst signals and their characteristics.
How to control the instrument remotely using Windows Remote Desktop.
Instructions for configuring network settings and connecting to a LAN.
To Next Page