Rohde & Schwarz FSV - Configuring the Network

Controlling the R&S FSVA/FSV Remotely
R&S
®
FSVA/FSV
175Quick Start Guide 1321.3066.02 ─ 06
3. Select "Submit".
8.8 Configuring the Network
After network support has been installed, data can be exchanged between the
instrument and other computers, and network printers can be used.
Network operation is only possible if you are authorized to access network
resources. Typical resources are file directories of other computers or even cen-
tral printers. Authorization is assigned by the network or server administrator.
Connection to networks
Before connecting the instrument to the network or configuring the network,
consult your network administrator, particularly for large LAN installations.
Errors may affect the entire network.
Never connect your analyzer to a network unprotected against virus infec-
tion because this may cause damage to the instrument software.
To integrate the instrument into your network, you can change the following sys-
tem properties:
●
Computer name
●
Domain
●
Workgroup
Operation on the network includes the following administrative tasks:
● Operating the Instrument Without a Network................................................ 175
● Creating Users.............................................................................................. 176
● Changing the User Password....................................................................... 176
● Mapping Network Drives............................................................................... 177
● Sharing Directories (only with Microsoft Networks).......................................179
8.8.1 Operating the Instrument Without a Network
To operate the instrument without a network connection either temporarily or per-
manently, no special measures are necessary. Windows automatically detects
Configuring the Network