Need help?Do you have a question about the Rohde & Schwarz FSV13 and is the answer not in the manual?
General| Frequency Range | 9 kHz to 13.6 GHz |
|---|---|
| Resolution Bandwidth | 1 Hz to 10 MHz |
| Input Impedance | 50 Ω |
| Maximum Input Level | +30 dBm |
| Interface | LAN, USB, GPIB (optional) |
| Analysis Bandwidth | 10 MHz, 40 MHz |
| Displayed Average Noise Level (DANL) | -165 dBm (1 Hz RBW) |
| Third-Order Intercept (TOI) | +15 dBm |
| Video Bandwidth (VBW) | 1 Hz to 10 MHz |
| Display | 10.1 inch, 1280 x 800 pixels |
| Input VSWR | < 1.5 |
Defines signal words like DANGER, WARNING, CAUTION, and NOTICE used in documentation.
Details safety precautions related to electrical connections and operation.
Emphasizes safe use in industrial, administrative, and laboratory environments.
Introduces the R&S FSVA/FSV, setup, basic operations, and general info.
Details the front panel layout, function keys, and connectors.
Describes the function keys on the front panel and their assigned functions.
Explains the AC power connector and the main power switch on the rear panel.
Describes how to connect the instrument to the AC power supply using the supplied cable.
Explains the procedure for turning the instrument on and off correctly.
Describes performing basic tasks like entering numeric and alphanumeric parameters.
Explains softkeys as virtual keys providing dynamic access to functions and submenus.
Explains using markers to measure signal level and frequency, including peak search.
Guides on measuring signal harmonics using the analyzer, including delta markers.
Explains how resolution bandwidth determines the ability to distinguish spectral components.
Covers measurements related to TDMA systems, focusing on zero span characteristics.
Explains measuring SNR by comparing power values during activation and deactivation phases.
Guides on measuring FM modulation depth by analyzing amplitude variations.
Explains using Windows Remote Desktop for remote monitoring, maintenance, and diagnostics.
Describes connecting via LAN using TCP/IP and the VISA resource string.
Details obtaining IP address information automatically via DHCP or manually.
Details configuring mandatory LAN parameters like IP address and subnet mask.
To Next Page