Front and Rear Panel View
R&S
®
FSVA/FSV
25Quick Start Guide 1321.3066.02 ─ 06
Two-port mixer
1. 1. Connect the LO OUT / IF IN output of the R&S FSVA/FSV to the LO/IF port
of the external mixer. The nominal LO level is 15.5 dBm.
Because of the diplexer contained in the R&S FSVA/FSV, the IF signal can be
tapped from the line which is used to feed the LO signal to the mixer.
2. Feed the signal to be measured to the RF input of the external mixer.
3.2 Rear Panel View
Figure 3-3 shows the rear panel view of the R&S FSVA/FSV. The individual ele-
ments are described in more detail in the subsequent sections. Optional connec-
tors and interfaces are indicated by the option name in brackets.
Rear Panel View
To Next Page
Loading...
