Preparing for Use
R&S
®
FSVA/FSV
56Quick Start Guide 1321.3066.02 ─ 06
other colors correspond to the screen colors of the default color setting of
the "Setup" menu.
Remote command: HCOP:CMAP:DEF2
● "User Defined Colors" option: You define and use your own color set for
the printout. For details how to proceed refer to Chapter 4.4.5.4, "Defining
and Using a User-Defined Color Set", on page 52.
Remote command: HCOP:CMAP:DEF3
● "Screen Colors (Hardcopy)" option: The current screen colors without any
changes for a hardcopy. For details on the output format seeChap-
ter 4.4.7.1, "Configuring the Printer and the Printout", on page 54 .
Remote command: HCOP:CMAP:DEF4
5. If you want a black-and-white printout, press the "Color On/Off" softkey to
switch off the color. In the black-and-white printout, all background colors are
printed out in white and all color lines in black. This allows you to improve con-
trast on the printout.
Remote command: HCOP:DEV:COL ON
4.5 Windows Operating System
The instrument contains the Windows 10 operating system which has been con-
figured according to the instrument's features and needs. Changes in the system
setup are only required when peripherals like keyboard or a printer are installed
or if the network configuration does not comply with the default settings. After the
R&S FSVA/FSV is started, the operating system boots and the instrument firm-
ware is started automatically.
To ensure that the instrument software functions properly, certain rules must be
adhered to concerning the operating system.
Windows Operating System
To Next Page
Loading...
