Controlling the R&S FSVA/FSV Remotely
R&S
®
FSVA/FSV
171Quick Start Guide 1321.3066.02 ─ 06
Each instrument is delivered with an assigned computer name, but this name can
be changed.
The default instrument name is a non-case-sensitive string with the following syn-
tax:
<Type><variant>-<serial_number>
The serial number can be found on the rear panel of the instrument. It is the third
part of the device ID printed on the bar code sticker:
For example, FSV4-123456
To change the computer name
1. Press the SETUP key and select "General setup" > "Computer name".
The current computer name is displayed here.
2. Enter the new computer name.
3. Confirm the entry.
8.6.4 Changing the Windows Firewall Settings
A firewall protects an instrument by preventing unauthorized users from gaining
access to it through a network. Rohde & Schwarz highly recommends the use of
the firewall on your instrument. Rohde & Schwarz instruments are shipped with
the Windows firewall enabled and preconfigured in such a way that all ports and
connections for remote control are enabled.
For more details on firewall configuration, see the following Rohde & Schwarz
White Paper:
●
1EF96: Malware Protection Windows 10
Note that changing firewall settings requires administrator rights.
Setting Up a Network (LAN) Connection
To Next Page
Loading...
