Preparing for Use
R&S
®
FSVA/FSV
58Quick Start Guide 1321.3066.02 ─ 06
For details and recommendations, see the Rohde & Schwarz White Paper
1EF96: Malware Protection Windows 10
4.5.3 Login
Windows 10 requires that users identify themselves by entering a user name and
password in a login window. By default, the R&S FSVA/FSV provides two user
accounts:
●
"Instrument": an administrator account with unrestricted access to the com-
puter/domain
●
"NormalUser": a standard user account with limited access
Automatic login
For the administrator account, an automatic login function is active by default. If
activated, login is carried out automatically for the administrator (with full access)
in the background when the R&S FSVA/FSV is started, without having to enter a
password. This function is active until you explicitly deactivate it or change the
password.
For information on how to deactivate or reactivate the automatic login, refer to
Chapter 4.5.3.1, "Automatic Login Function", on page 59.
Passwords
For all default user accounts, the initial password is 894129. Note that this pass-
word is very weak, and it is recommended that you change the password for both
users after initial login.
You can change the password in Windows 10 for any user at any time via "Start >
Settings > Account > SignIn Options > Password > Change".
Changing the password and use of auto-login function
Note that when you change the default passwords, the default auto-login
function no longer works! Reactivate it manually as described in "Reactivat-
ing the automatic login function" on page 60.
Windows Operating System
To Next Page
Loading...
