Basic Operations
R&S
®
FSVA/FSV
69Quick Start Guide 1321.3066.02 ─ 06
Label Description
75 Ω The input impedance of the instrument is set to 75 Ω.
FRQ A frequency offset ≠ 0 Hz is set.
DC/AC An external DC or AC calibration signal is in use.
Inp Input source: digital I/Q (option R&S FSV-B17 only)
6.1.4 Diagram-specific and Trace Information
Diagram-specific information, e.g. concerning traces, is indicated in the diagram
header and footer.
Trace information in diagram header
The diagram header (above the diagram) contains the following trace information:
The header may contain a user-defined introductory title, see Chapter 6.4.7,
"Adding a Title to the Diagram Header", on page 96.
Editing settings in the diagram header
All settings that are displayed in the diagram header can easily be edited by
selecting the setting in the display (by tapping or clicking). The correspond-
ing (edit) dialog box is displayed in which you can edit the setting.
Norm/NCor
Correction data is not used.
Trace color
Color of trace display in diagram
Trace no.
Trace number (1 to 6)
Detector
Selected detector:
AP AUTOPEAK detector
Pk MAX PEAK detector
Information in the Diagram Area
To Next Page
Loading...
