Controlling the R&S FSVA/FSV Remotely
R&S
®
FSVA/FSV
134Quick Start Guide 1321.3066.02 ─ 06
Windows will then map drives of the controller to the corresponding network
drives.
9. To use printers connected to the controller while accessing them from the
R&S FSVA/FSV, activate the "Printers" option. Do not change the remaining
settings.
10.Open the "Display" tab.
The options for configuring the R&S FSVA/FSV screen display are displayed.
11.Under "Remote desktop size", you can set the size of the R&S FSVA/FSV
window on the desktop of the controller.
12.Under "Colors", do not change the settings.
Operation with Windows Remote Desktop
To Next Page
Loading...
