Preparing for Use
R&S
®
FSVA/FSV
52Quick Start Guide 1321.3066.02 ─ 06
6. Repeat the steps for all objects that you want to change in color.
7. To change to user-defined colors, press the "Userdefined Colors" softkey. For
details refer toChapter 4.4.5.4, "Defining and Using a User-Defined Color
Set", on page 52.
8. Click "OK" to accept the new settings and to close the dialog box.
Remote command:
DISP:CMAP1 ... 41:PDEF <color>
4.4.5.4 Defining and Using a User-Defined Color Set
1. In the screen colors submenu (see Chapter 4.4.5.1, "Displaying the Screen
Colors Submenu", on page 50), press the "Select Screen Color Set" softkey.
The "Select Screen Color Set" dialog box is displayed.
2. Select the "User Defined Colors" option.
3. In the "Screen Colors" submenu, press the "Select Object" softkey.
The "Screen Color Setup" dialog box is displayed.
R&S FSVA/FSV Setup
To Next Page
Loading...
