Instrument Tour
R&S
®
FSW
51Getting Started 1338.4102.02 ─ 08
5.2.3 USB
The rear panel provides four additional female USB (USB-A) connectors to con-
nect devices like a keyboard, a mouse or a memory stick (see also Chap-
ter 5.1.13, "USB", on page 46).
Furthermore, a male USB DEVICE connector (USB-B) is provided, for example to
connect the R&S FSW to a PC for remote control.
All USB connectors support standard 2.0.
5.2.4 LAN
The R&S FSW is equipped with a 1 GBit Ethernet IEEE 802.3u network interface
with Auto-MDI(X) functionality. The assignment of the RJ-45 connector supports
twisted-pair category 5 UTP/STP cables in a star configuration (UTP stands for
unshielded twisted pair, and STP for shielded twisted pair).
For details, see the R&S FSW user manual.
5.2.5 Display Port and DVI
You can connect an external monitor or other display device to the R&S FSW to
provide an enlarged display. Two different types of connectors are provided for
this purpose:
●
Display Port
●
DVI (digital visual interface)
For details, see Chapter 4.9, "Connecting an External Monitor", on page 23.
5.2.6 Bandwidth Extension Options with IF WIDE OUTPUT Con-
nector
You can extend the signal analysis bandwidth of the R&S FSW by a hardware
option (R&S FSW-B160/-B320/-B512/-B1200/-B2001/-B4001/-B8001 or
R&S FSW-Uxxx). The bandwidth extension allows for an output sample rate of up
to 10 GHz and a linear bandwidth up to:
●
160 MHz (with option B160/U160)
●
320 MHz (with option B320/U320)
Rear Panel View
To Next Page
Loading...
