Rohde & Schwarz FSWP Series - Connecting a Keyboard

Preparing for Use
R&S
®
FSWP
23Getting Started 1177.5756.02 ─ 13
operate the product in a secure LAN environment, see the Rohde & Schwarz
white paper 1EF96: Malware Protection Windows 10.
► NOTICE! Risk of network failure.
Consult your network administrator before performing the following tasks:
● Connecting the instrument to the network
● Configuring the network
● Changing IP addresses
● Exchanging hardware
Errors can affect the entire network.
Connect the R&S FSWP to the LAN via the LAN interface on the rear panel of
the instrument.
Windows automatically detects the network connection and activates the
required drivers.
By default, the R&S FSWP is configured to use DHCP and no static IP
address is configured.
The default instrument name is <Type><variant>-<serial_number>, for
example, FSWP26-123456. For information on determining the serial num-
ber, see Chapter 4.2.15, "Device ID", on page 51.
For more information on LAN configuration, see the R&S FSWP user manual.
3.8 Connecting a Keyboard
The keyboard is detected automatically when it is connected. The default input
language is English – US.
However, you can also connect foreign language keyboards; currently the follow-
ing languages are supported for the R&S FSWP:
●
German
●
Swiss
●
French
●
Russian
Connecting a Keyboard