Rohde & Schwarz FSWP Series - Page 53

Trying Out the Instrument
R&S
®
FSWP
53Getting Started 1177.5756.02 ─ 13
Integration ranges
●
"How to define integration ranges" on page 65
The cross-correlation gain indicator
●
"How to control the cross-correlation gain indicator (gray area)" on page 66
Miscellaneous evaluation tools
●
"Zooming into the results" on page 67
●
"Exporting measurement data" on page 67
Frequency configuration
●
"How to define the measurement range" on page 68
●
"How to search for signals" on page 69
●
"How to define a carrier frequency manually" on page 69
The half decade configuration table
●
"How to work with the half decade configuration table" on page 69
Pulsed measurement configuration
●
"How to configure a gate for measurements on pulses" on page 70
Signal generation
●
"How to generate a CW signal" on page 71
●
"How to generate a pulse" on page 72
DUT power supply
●
"How to supply DUTs with current or voltage" on page 72
An in-depth description of all features, including remote commands, is available in
the R&S FSWP user manual.
● Initial Setup..................................................................................................... 54
● Measurements................................................................................................ 55
● Result Evaluation............................................................................................ 62
● Measurement Configuration............................................................................68