Preparing for Use
R&S
®
FPL1000
20Getting Started 1179.4657.02 ─ 10
2. NOTICE! Insufficient airflow can cause overheating and damage the product.
Design and implement an efficient ventilation concept for the rack.
To mount the R&S FPL1000 in a rack
1. Use an adapter kit to prepare the R&S FPL1000 for rack mounting.
a) Order the rack adapter kit designed for the R&S FPL1000. For the order
number, see the data sheet.
b) Mount the adapter kit. Follow the assembly instructions provided with the
adapter kit.
2. Lift the R&S FPL1000 to shelf height.
3. Grab the handles and push the R&S FPL1000 onto the shelf until the rack
brackets fit closely to the rack.
4. Tighten all screws in the rack brackets with a tightening torque of 1.2 Nm to
secure the R&S FPL1000 in the rack.
To unmount the R&S FPL1000 from a rack
1. Loosen the screws at the rack brackets.
2. Remove the R&S FPL1000 from the rack.
3. If placing the R&S FPL1000 on a bench top again, unmount the adapter kit
from the R&S FPL1000. Follow the instructions provided with the adapter kit.
4.4.3 Portable Operation
An optional carrying bag designed specifically for the R&S FPL1000 allows you to
protect the instrument while working in the field. The bag includes ventilation
areas at the position of the ventilation outlets in the casing to ensure air circula-
tion. The transparent cover allows you to operate the instrument without removing
it from the bag. With the help of the optional vest holster, you can carry the
R&S FPL1000 in its bag and keep your hands free. Together with the optional
battery pack (see Chapter 4.5.3, "Optional Battery Pack (R&S FPL1-B31)",
on page 23), and packed in the dedicated carrying bag, the R&S FPL1000 is
ideally suited for operation directly in the field, even in rough environments.
Setting Up the R&S FPL1000
To Next Page
Loading...
