Operating the Instrument
R&S
®
FPL1000
72Getting Started 1179.4657.02 ─ 10
7 Operating the Instrument
This chapter provides an overview on how to work with the R&S FPL1000.
Remote control
In addition to working with the R&S FPL1000 interactively, located directly at
the instrument, it is also possible to operate and control it from a remote PC.
Various methods for remote control are supported:
●
Connecting the instrument to a (LAN) network
●
Using the web browser interface in a LAN network
●
Using the Windows Remote Desktop application in a LAN network
●
Connecting a PC via the GPIB interface
How to configure the remote control interfaces is described in the
R&S FPL1000 user manual.
● Understanding the Display Information - Spectrum Mode.............................. 72
● Accessing the Functionality.............................................................................81
● Entering Data.................................................................................................. 86
● Touchscreen Gestures.................................................................................... 88
● Getting Help.................................................................................................... 91
7.1 Understanding the Display Information - Spec-
trum Mode
The following figure shows a measurement diagram in Spectrum mode. All differ-
ent information areas are labeled. They are explained in more detail in the follow-
ing sections.
Understanding the Display Information - Spectrum Mode
To Next Page
Loading...
