Preparing for Use
R&S
®
FPL1000
24Getting Started 1179.4657.02 ─ 10
When the battery is being charged in standby mode, the [Power] LED
blinks. During operation, the status bar indicates that the battery is
being charged.
Spare battery pack (R&S FPL1-Z4)
In addition to the internal battery pack (option R&S FPL1-B31), spare batteries
are available for the R&S FPL1000. The spare battery pack R&S FPL1-Z4 com-
prises two additional Li-ion batteries.
Outside the R&S FPL1000, batteries can be charged using the external battery
charger R&S FSV-B34. Even during battery operation, you can exchange the
internal batteries while the R&S FPL1000 is running, as long as one battery
remains in the instrument. However, it is not recommended to operate the
R&S FPL1000 with only one battery for a longer period.
4.6 Switching On or Off
Table 4-1: Overview of power states
Status LED on Power key Position of main power switch
Off
gray
[0]
Standby
orange
[I]
Ready
green
[I]
To switch on the R&S FPL1000
The R&S FPL1000 is off but connected to power.
1. Set the switch on the power supply to position [I].
See Chapter 5.2.1, "AC Power Supply Connection and Main Power Switch",
on page 44.
The LED of the Power key is orange.
See Chapter 5.1.2, "Power Key", on page 38.
2. Press the Power key.
The LED changes to green.
Switching On or Off
To Next Page
Loading...
