Instrument Tour
R&S
®
FPL1000
39Getting Started 1179.4657.02 ─ 10
Table 5-1: System keys
System key Assigned functions
[Preset] Resets the instrument to the default state.
[Setup]
Provides basic instrument configuration functions, e.g.:
●
Reference frequency (external/internal)
●
Date, time, display configuration
●
LAN interface
●
Firmware update and enabling of options
●
Information about instrument configuration incl. firmware ver-
sion and system error messages
●
Service support functions (self-test etc.)
●
Self-alignment (with spectrum analysis option)
[Mode] Manages channel setups
[Print] Provides configuration settings for the print function
[FILE] Provides save/recall functions for instrument settings and mea-
surement results
Switches between the on-screen keyboard display:
●
At the top of the screen
●
At the bottom of the screen
●
Off
5.1.5 Function Keys
Function keys provide access to the most common measurement settings and
functions.
A detailed description of the corresponding functions is provided in the
R&S FPL1000 user manual.
Table 5-2: Function keys
Function key Assigned functions
[Freq] Sets the center frequency and the start and stop frequencies for
the frequency range under consideration. This key is also used to
set the frequency offset and the signal track function.
[Span] Sets the frequency span to be analyzed
[Ampt] Sets the reference level, the displayed dynamic range, the RF
attenuation and the unit for the level display
Sets the level offset and the input impedance
Activates the (optional) preamplifier
[BW] Sets the resolution bandwidth and the video bandwidth.
Front Panel View
To Next Page
Loading...
