Rohde & Schwarz R&S FSH Series - Page 227

R&S FSH Field-Strength Measurement with Isotropic Antenna
1145.5973.12 4.127 E-11
To use transducer factors for the isotropic antenna:
 Press the MEAS key.
The R&S FSH will display the softkey menu for
controlling the transducer factors.
Note:
The TRANSD softkey enables you to activate the three
transducer factors for the X, Y, and Z axes individually.
The TRANSD dB softkey enables you to activate an
additional transducer factor for compensating the
antenna cable, which the R&S FSH adds to the
measurement result. EXIT exits the transducer menu,
and TRD'S OFF deactivate all transducer factors.
 Press the TRANSD softkey.
The R&S FSH will open the menu for selecting the
transducers for the X, Y, and Z axes.
 Select an axis with the cursor keys or the rotary
knob and confirm with the TRANSD softkey or the
ENTER key. The highlighted row indicates which
transducer factors are already activated.
The R&S FSH will display the list of transducer factors
available in the instrument.
 Select the transducer factor associated with the
previously selected axis by using the rotary knob or
the cursor keys and activate with the SELECT
softkey.
 Perform this same procedure for all three axes.