Saving and Loading Instrument Settings and Measurement Results R&S FSH
1145.5973.12 4.136 E-11
Press the SAVE / PRINT key.
The R&S FSH opens the SAVE / PRINT menu where
the functions for saving, clearing and loading data sets
are displayed for selection.
A screenshot can also be output to a printer.
Saving results
Press the SAVE softkey.
The R&S FSH opens a text box and prompts the user
to enter a name for the data set.
The Name entry box, which is highlighted in red, also
suggests a name for the data set (DATASET.000)
which can be accepted by pressing the ENTER key.
For the sake of simplicity, the R&S FSH also saves the
data set when the SAVE softkey under the suggested
name is pressed twice.
The remaining free memory locations
(Free Locations) are also displayed in the text box.
Since the data sets can be different in size, the
remaining storage space is indicated as a percentage
value.
The data set name comprises a text section and a numeric extension, which are separated by a full
stop. The data set name suggested by the R&S FSH is derived from the name of the data set last
stored, the numeric extension being incremented by 1 in each case.
This means that consecutive data set names can be assigned by simply saving with SAVE or ENTER.
The names of the data sets already stored can be displayed one after the other using the BACK key.
This allows, for example, to store new results under the name of a previous data set (for example
Antenna.000), but with a new extension. The R&S FSH displays the old name together with the first
unassigned extension, e.g. Antenna.001. No new name has to be entered.
To Next Page
Loading...
