Entering Measurement Parameters R&S FSH
1145.5973.12 3.4 E-11
Entering units
T
o enter a unit for a value entry, terminate the entry with a unit key. Use the unit keys down the right-
hand side of the alphanumeric keypad. These keys have multiple assignments which depend on the
unit entry expected by the R&S FSH.
GHz, -dBm, V, s
MHz, dBm, dBmV, mV, ms
kHz, dBHV, HV, Hs
kHz, nV, ns
The relative unit dB can be entered with any of the unit keys.
To Next Page
Loading...
