Operating Concepts
R&S
®
NRP Series
39Getting Started 1419.0170.02 ─ 12
For a detailed description on how to measure in this setup, refer to the operating
manual of the R&S NRPV.
6.5 R&S Power Viewer
The R&S Power Viewer is software that simplifies many measurement tasks. It is
provided on your documentation CD-ROM and on the Rohde & Schwarz website
as a separate standalone installation package.
Required equipment
●
R&S NRP power sensor
●
R&S NRP‑ZKU cable or an R&S NRP‑Z5 sensor hub and an R&S NRP‑ZK6
cable to connect the sensor to the computer
●
Computer with installed:
– R&S NRP Toolkit V 4.17 or higher
– R&S Power Viewer version 9.2 or higher (refer to the operating manual of
the R&S Power Viewer for a description of the installation process)
R&S Power Viewer
To Next Page
Loading...
