Need help?Do you have a question about the Rohde & Schwarz NRP-Z11 and is the answer not in the manual?
General| Power Range | -70 dBm to +20 dBm |
|---|---|
| Sensor Type | Thermal power sensor |
| Measurement Uncertainty | 1.8% to 7.0% (depending on frequency and power level) |
| Storage Temperature Range | -40 °C to +70 °C |
| Connector Type | N (female) |
| Calibration | Factory calibration |
| Connector | N (female) |
Information on potential dangers and instructions for preventing injury or damage.
Instructions for removing the power sensor from its packing and checking for damage.
Guidelines for connecting the power sensor to the R&S NRP base unit and ensuring proper connection.
Details on operating the power sensor with the R&S NRP/NRP2 power meter.
Setup and requirements for controlling the power sensor via a PC.
Information on using the power sensor with other Rohde & Schwarz test instruments.
Troubleshooting common problems related to PC control of the R&S NRP-Z5.
Introduction to the Power Viewer program module for virtual power meter functionality.
Description of functions accessible via the menu bar in the Power Viewer program.
Using the USB terminal for sending commands and displaying sensor data.
Information on updating the sensor firmware.
Loading s-parameter tables for calibration and measurement accuracy.
Explanation of the syntax and notation used for SCPI commands and parameters.
Description of common commands and queries supported as per IEEE 488.2 standard.
Overview of SCPI command groups: CALibration, SENSE, SYSTem, TRIGger, SERVice.
Instructions for packing the product using original or similar protective materials.
Guidelines for securing the product when moving it in a vehicle or using transport equipment.
Information on the maximum transport altitude without pressure compensation.
Periodic checks of RF connectors for visible damage to ensure proper function.
Procedures for cleaning the power sensor exterior and RF connectors using appropriate materials.
Recommendations for storing the power sensor, including protecting connectors and maintaining environmental conditions.
Rohde & Schwarz's commitment to eco-friendly disposal and recycling of waste material.
To Next Page
