Rohde & Schwarz NRP-Z11 - Menus

R&S NRP-Z11/21/31/41/61/211/221 Program module "Terminal"
1137.7470.12 3.3 E-7
A command line starting with a tab, a blank or a special character is considered a comment and not
f
orwarded to the sensor.
Measurement results, parameters and status information returned by the sensor are displayed in the
Output field.
Table 3-3 Buttons assigned to the Output field
Button Function Key combination
Clear
Clears the content of the Output field
Alt + A
Copy
Copies the content of the Output field to the clipboard. (Another possiblity:
mark the desired information in the output window with the mouse cursor,
press the right mouse key or Ctrl+C and then copy the selected text to the
clipboard using the menu item Copy in the opened context menu.)
Alt + Y
Font button
Opens a dialog window where the font for the Output field can be selected.
Colour button
Opens a dialog window where the background colour of the Output field can
be selected.
Close the USB terminal with OK.
Menus
View Post Filter … Opens the Output Postfilter dialog window
where the lines stored in
the input buffer can be filtered according to different criteria.
Filter criteria:
Only + Starting with:
Only lines starting with the entered character
string are displayed.
Not + Starting with: Only lines not starting with the
entered character
string are displayed.
Only + Containing:
Only lines containing the entered character string
are displayed.
Not + Containing:
Only lines not containing the entered character
string are displayed.
Lines not matching the specific filter crit
erion are blanked but not
cleared.