Rohde & Schwarz SMA100B - Mounting the R&S SMA100 B in a Rack

Preparing for use
R&S
®
SMA100B
17Getting Started 1419.8620.02 ─ 10
4 Preparing for use
Here, you can find basic information about setting up the product for the first time.
4.1 Lifting and carrying
Use the handles at the side, for lifting and carrying the R&S SMA100B, see "Lift-
ing and carrying the product" on page 8. Use the handles at the front, for mount-
ing the R&S SMA100B in a rack.
1
2
Figure 4-1: Instrument side view with front handles (1) and side handles (2)
4.2 Unpacking and checking
1. Unpack the R&S SMA100B carefully.
2. Retain the original packing material. Use it to protect the control elements and
connectors when transporting or shipping the R&S SMA100B later.
See also chapter "Transporting" in the user manual.
3. Using the delivery notes, check the equipment for completeness.
4. Check the equipment for damage.
If the delivery is incomplete or equipment is damaged, contact
Rohde & Schwarz.
Unpacking and checking