Getting Started
R&S
®
ZNB/ZNBT
48User Manual 1173.9163.02 ─ 54
Figure 4-6: Function Keys
Customizing the screen
The contents of the screen and the size and position of many display and control ele-
ments are not fixed. You can display or hide most elements. You can also drag and
drop traces, info fields, and even the softtool panel to your preferred position; see
Chapter 4.3.4.4, "Using Drag and Drop", on page 62.
For example, you can show/hide the on-screen hardkey panel by selecting/deselecting
"Display" > "View Bar" > "Hard Key Panel On" from the main menu.
Using (Virtual) Hardkeys
To access an instrument function:
1. Press a (virtual) key, e.g. the [MEAS] key in the TRACE section.
The corresponding softtool expands at the current docking position.
Operating the Instrument
To Next Page
Loading...
