GUI Reference
R&S
®
ZNB/ZNBT
634User Manual 1173.9163.02 ─ 54
Currently, the "TDR Wizard" is only available for the R&S ZNB.
Step 1: Port Topology
The "Port Topology" step allows you to select between predefined (balanced) port con-
figurations.
The port configurations are the same as the ones offered on the "Predefined Config"
Tab of the Balanced Ports Dialog. For instruments with more than 4 ports (on the VNA
and connected switch matrices), port 5 and above are disabled.
Step 2: Stimulus Settings
The "Stimulus Settings" step gives access to the basic settings of the TDR Stimulus
Settings Dialog and allows you to select the time domain measurements to be per-
formed.
Applic Softtool
To Next Page
Loading...
