GUI Reference
R&S
®
ZNB/ZNBT
455User Manual 1173.9163.02 ─ 54
Figure 6-25: SMARTerCal (Cal Unit), Step 2: Connections (single)
Figure 6-26: SMARTerCal (Cal Unit), Step 2: Connections
Related information
Refer to Chapter 5.5.5.4, "Multiple Port Assignments", on page 173 for details on multi-
ple port assignments.
Port Assignment (manual)
The "Connections" step allows you to configure the assignments between VNA ports
and calibration unit ports manually.
The R&S ZNB/ZNBT always proposes an optimum solution (minimum number of
assignments) that also minimizes the physical port reconnections required between
calibration stages. For user-modified assignments, it provides assistive information
indicating insufficient, or redundant entries.
Cal Softtool
To Next Page
Loading...
