ROHO Sensor Ready Cushion Operation Manual
7
Close
5. Pinch the rubber nozzle of the hand pump and close the
inflation valve completely. Remove the hand pump.
6. The individual should sit in the chair in their usual
position. The cushion should be centered beneath
the individual.
7. Slide your hand between the cushion and the individual. Lift the leg slightly
and feel for the lowest bony prominence, and then lower the leg to a sitting
position.
8. Open the valve to remove air, keeping
your hand beneath the individual’s
lowest bony prominence. Release air
until you are barely able to move your
fingertips. Close the valve.
Cushion Adjustment, Continued
A
B
Proper Cushion Inflation Setting: A) sink down into
the cushion and B) “float” above the cushion base.
½" - 1" (1.5 cm - 2.5 cm)
recommended distance between the
individual and the seating surface.
=
To Next Page
Loading...
