Rointe D SERIES - 1. Introduction; 2. Technical Specifications

4
1. INTRODUCTION
The D Series electric water heater is a high quality unvented enam-
elled steel domestic hot water cylinder suitable for domestic hot
water systems where the cold mains water supply has a maximum
supply pressure of 0.9 MPa. Reduced performance is available at
lower pressures but the units are not suitable for pressures lower
than 0.15 MPa and flow rate of 20 litres per minute.
Rointe offers the possibility to acquire all the necessary safety
equipment to comply with legislation governing the installation of
such systems.
2. TECHNICAL ESPECIFICATIONS
TECHNICAL SPECIFICATIONS - 50L, 75L & 100L
MODEL NOMBER DWI050DHW2 DWI075DHW2 DWI100DHW2
Storage capacity (l)
50 75 100
Power (W)
2,400 2,400 2,400
Depth (mm)
404 404 404
Width (mm)
404 404 404
Overall height incl T/P valve
780 1,000 1,250
Height excl T/P valve
680 900 1,150
Weight when full (kg)
68 100 132
Cold feed/hot draw off
connections (mm)
15 15 15
Maximum water supply
pressure (MPa)
0.9 0.9 0.9