Roland Aerophone Pro AE-30 - Assigning Functions to Controllers (ASSIGN)

15
Making Settings in the Menu
Scene Settings
These settings are for each individual scene.
* The following table explains about certain settings you can make on this instrument. For other settings, see the “Aerophone Pro Parameter
Guide” (PDF).
You can use the “Aerophone Pro Editor” app to congure all scene settings.
Indication Value Explanation
Scene Volume 0–127 Species the volume of each scene.
Scene Transpose -5–0–+6
Species the transposition (pitch shift) of each scene.
* If the system setting’s transpose mode is “Scene,” this transpose value is applied when you select
the scene.
* If, after selecting the scene, you operate the transpose knob, the transpose value of the knob is
applied.
Scene Octave Shift -3–0–+3 Species the octave shift setting of the scene.
All Eects O –
Turns o all eects (chorus, reverb, delay and MFX) set for the scene.
To turn all eects o, press the [MENU] button and then press the [+] (A) button.
MEMO
If you edit the scene settings and then select a dierent scene without saving the edited settings, the following message screen appears.
If you want to switch scenes without saving, press the [-](C) button. If you want to save the settings, press the [+](A) button.
If you decide to cancel, press the [MENU] button.
You can also prevent this screen from appearing.
& “Aerophone Pro Parameter Guide” (PDF)