Roland Aerophone Pro - Initializing a User License

19
Installing a Sound Pack/Wave Expansion
Initializing a User License
User License
SOUND PACK and WAVE EXPANSION are associated with the
user licenses of the user who downloaded them.
SOUND PACK or WAVE EXPANSION that have diering user
licenses cannot be imported into the same AE-30.
User A
EXZ001
A
User A
EXZ002
User B
EXZ002
A B
A
If you want to import or install SOUND PACK and WAVE
EXPANSION that has a dierent user license than what is
already registered to this AE-30 unit, you must initialize the user
licenses.
Initialize
A
User A
EXZ002
User B
EXZ002
A B
Here’s how to reset a user license.
When a license is reset, the installed wave expansion is uninstalled.
1. While holding down the [MENU] button, turn on the
power.
Hold down the [MENU] button until the Roland logo disappears.
2. Use the [K] [J] button to select “Remove License,” and
then press the [MENU] button.
3. Press the [J] button and select “YES.” To cancel, press the
[K] button and select “NO.”
4. The Remove License conrmation message appears. Press
the [MENU] button to execute.
If you decide to cancel, press the [K] button.
When the reset is complete, the message “Completed!” appears.
Press the [MENU] button to return to the Remove License screen.