Roland Camm-1Pro Series User Manual

Thank you very much for purchasing this product.
 To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through this
manual completely and store it in a safe location.
 Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.
 The contents of this operation manual and the specications of this product are subject to change without notice.
 The operation manual and the product have been prepared and tested as much as possible. If you nd any misprint or error,
please inform us.
 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through use of this
product, regardless of any failure to perform on the part of this product.
 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with respect to any
article made using this product.
User's Manual

Roland Camm-1Pro Series Specifications

General

Model	Camm-1Pro Series
Type	Vinyl Cutter/Plotter
Mechanical Resolution	0.0004 inches (0.01 mm)
Connectivity	USB
Software Compatibility	Roland CutStudio
Media Types	Vinyl
Power Consumption	30W
Operating Humidity	35 to 80% RH (non-condensing)

Summary

Safety and Handling Precautions

Warning and Caution Notice Definitions

Explains the meaning and intent of warning and caution labels.

Safety Symbol Definitions

Defines the meaning of various safety symbols used in the manual.

Warning Label Locations and Meanings

Locates and explains the purpose of warning labels affixed to the machine.

Getting Started with Your Cutter

Machine Part Identification

Identifies key components and their locations on the machine.

Menu Navigation Guide

Provides a visual representation of the machine's menu structure.

Core Operation Procedures

Loading Roll Material

Step-by-step guide on how to load various types of roll material.

Blade Installation and Adjustment

Instructions for installing and adjusting the cutting blade for optimal performance.

Cutting Start, Pause, and End Procedures

Procedures for starting, pausing, resuming, and terminating cutting operations.

Advanced Cutting Techniques

Detailed Cutting Condition Settings

Explains how to fine-tune cutting parameters for different materials and results.

Origin Point and Cutting Area Details

Describes how origin points and cutting areas are determined based on material loading.

Lengthy Cutting Guide

Guidance on techniques and considerations for cutting long materials.

Crop Mark Feature Usage

Explains how to use crop marks for precise alignment when cutting printed materials.

Using Various Materials

Guidance on handling and cutting different types of materials, including special ones.

Maintenance and Troubleshooting Guide

Machine Maintenance Procedures

Covers cleaning procedures for the machine's body, platen, rollers, and components.

Troubleshooting Common Issues

Troubleshooting guide for common machine issues, error messages, and operational problems.

Technical Specifications and Features

Material and Blade Selection

Provides guidance on choosing appropriate materials and blades for specific cutting tasks.

List of Functions

Details the functions of control keys and menu items available on the machine.

Power Rating and Serial Number Label Locations

Identifies the locations of important labels for power rating and serial numbers.

Interface Specifications

Details serial and USB interface specifications and connector pinouts.