Roland Camm-1 CX-24/12 User Manual

CX-24/12
Thank you very much for purchasing the CX-24/12.
• To ensure correct and safe usage with a full under-
standing of this product's performance, please be sure
to read through this manual completely and store it in
a safe location.
• Unauthorized copying or transferral, in whole or in
part, of this manual is prohibited.
• The contents of this operation manual and the
specifications of this product are subject to change
without notice.
• The operation manual and the product have been
prepared and tested as much as possible. If you find
any misprint or error, please inform us.
• Roland DG Corp. assumes no responsibility for any
direct or indirect loss or damage which may occur
through use of this product, regardless of any failure
to perform on the part of this product.
USER’S MANUAL

Roland Camm-1 CX-24/12 Specifications

General

Cutting Speed	500 mm/s
Software Resolution	0.025 mm
Interface	USB
Replot Memory	Yes
Power Supply	AC 100-240V, 50/60Hz
Power Consumption	30W

Summary

To Ensure Safe Use

Safety Notices and Symbols

Explains the meaning of WARNING, CAUTION, and various safety symbols used in the manual.

About Unit Labels

Checking Supplied Items

Part Names and Functions

Operation Panel Details

Preparing the CX-24/12

Installation and Environment

System Connection

Instructions for connecting the CX-24/12 to a computer via serial or parallel interfaces.

Software and Driver Installation

Steps for installing the essential driver software for computer communication with the CX-24/12.

Port and Menu Settings

Basic Operation

Installing the Cutting Blade

Step-by-step guide for installing the blade holder and blade.

Loading the Material

Turning on the Power and Setup

Checking Material Feed

Setting the Origin Point

Performing Cutting Tests

How to conduct test cuts to adjust blade force and extension for optimal results.

Downloading Cutting Data

Display Menu Descriptions

Troubleshooting Guide

Unit Not Running or Paused

Solutions for common issues like the machine not starting, being paused, or connection problems.

Material Feed and Slipping Issues

Addresses problems related to material slipping, improper loading, or damaged pinch rollers.

Cutting Quality and Error Messages

Fixes for poor cut quality, displaced results, and explanations of various error codes.