Roland CM-500 - 2. Making The Connection; MIDI Cable Connections; Audio Cable Connections

2. Making The Connection
@ MIDI Cable Connections
Connect your CM-500 to computers and MIDI sequencers using the included MIDI cable
"er ms Dees tum uem vo
ее
MIDI OUT
(1) Plug one end of the cable into the MIDI IN port of the СМ-500.
(2) Plug the other end of the cable into the MIDI OUT port of your computer or
sequencer.
© Audio Cable Connections
Connect keyboard amplifiers, stereos, portable radio/cassette players, ete., to the CM-500's
Audio Outs using standard audio cables.
Stereo System
MA-12C
Monitor Speaker
(amplifire)
(1 Plug the cables into the CM-500's Audio Outs.
Connect the quarter-inch plugs to the CM-500's Audio Out jacks.