Roland D-50 - Page 119

rere
m
ist
0100
0000
DOO}
0100
9000
0000
0000
Odad
Ocee
Off
Oggs
Wil
8.2.2 Data set
Byte
a ou
b 0100
¢ 0000
qd 0001
e 0100
f Qaaa
g Obbb
hh Ocee
i Oddd
J Ocee
kN)
Request data
‘9000
000!
Anon
0100
9001
0010
0000
9000
dadd
eee
ffft.
SESE
Ont
9000
000:
anna
0100
Ould
aaa
bbbb
ecee
dddd
cece
Olly
824 Acknowledge
“o@
nH
0100
oo00
000
0100
Wi
000
0001
nana
0100
Ooh
OL
8.25 End of data
Byte
a
oo
d
°
f
Aled
0100
0000
0001
100
il
9000
6001
anna
0100
0101
Onl
8.2.6 Communication
Byle
a oii
b o100
ec 0000
d 000!
e 0100
foul
8.2.7 Rejection
Byte
a ou
b 9100
¢ 9000
d 0001
¢ 6100
f lt
Notes :
9000
000)
annn
0100
1110
Onl
ov0e
0001
nanan
0100
Vl
O1ll
error
RQD Alu
i? iption
Exclusive status
Roland ID #
Device-ID # = MIDI basic channel
where nnnn + 3 = channel #
Model-ID # ( D--80 >
Command-ID # (RQD)
Address MSB *8-1
Address
Address LSB
Size MSB. *8-3
Size
Sixe LSB
Checksum
End of System Exclusive
DAT 42H
Description
Exclusive status
Roland ID #
Device—1D # = MIDI basic channet
where nnan + 1 = channel #
Model-1D # (D-50)
Command-ID # (DAT >
Address MSB *B-
Address
Address LSB
Data *8-2
Checksum
End of System Exclusive
ACK 43H
Description
Exclusive status
Roland ID #
Device~1D # = MID! basic channel
where nanan + 1 = channel #
Model-ID # ( D-50)
Command-ID # ( ACK )
End of System Exclusive
ROD 45H
De:
Exclusive status
Roland ID #
Device-ID # = MIDI basic channel
where annn + 1 = channel #
Model-ID # ( D-S0)
Command-ID # ( EOD)
End of System Exclusive
ERR 4EH
Description
Exclusive status
Roland ID #
Devicc—ID # = MIDI basic channel
where nnna + } = channel #
Model—-ID # (D-50)
Command~ID # ( ERR )
Rnd of System Exclusive
RIC 4FH
Description
Exclusive status
Roland ID #
Device-ID # = MIDI basic channel
where nnnn + 1 = channel #
Model-ID # ( D-50)
Command—ID # (RIC)
End of System Exclusive
%*8-1 If the assinged address excecds Memory area, it is ignores,
%*8~2 Number of data in data set ( DTI, DAT ) should not exceed
*8-—3 ‘The size that excecds Memory area should not be assinged.
objective _unit_
€ DTS se )
* time interval about 20 ms
¢ pr —— >
9.2 When any of Patch Group, Bank or Number is changed by operating the pancl
of the unit and if Exclu in MIDI Func is set to P—Dump, all data in Temp. area
will be transmitted,
this_unit message gbjective_unit
Program
change —————_—_—
CDT +--+ >
% time interval about 20 ms
(DFt
—
—
)
9.3
When
one
way
data
set
(DTI)
is
received
this_unit
message
objective
unit
DT
keep time interval more than 20 ms
—— DT1
DTL
94 In the ‘Bulk Dump’ mode
Data in all memory areas, including Reverbs 17 to 32, is transmitted from the
beginning.
this unit message objective unit
DT ---———
* time interval about 20 ms
DT -——_~
DP) neo
9.5 Jn the "Bulk Load’ mode
Data in all memory areas, including Reverbs 17 to 32, is transmitted from the
beginning.
this_unit message gbjcctive_unit
eee T
% Keep time interval more than 20 ms
Notes :
It sends RIC and slops the sequence when it receives ERR or detects some error.
%*it sends RIC when the sequence is discontinued manually,
It slops the sequcace immediately when it receives RIC.
13