Roland D-50 - 4 EDITING PERFORMANCE CONTROLLING FUNCTIONS; 1. BASIC EDITING OPERATION

EDITING PERFORMANCE CONTROLLING FUNCTIONS
[4JEDITING PERFORMANCE CONTROLLING FUNCTIONS
The performance controlling functions (we call them “Factors” in
this manual) in each Patch can be edited by taking the following
procedure.
A Patch consists of several Factors as shown below.
Upper Tone
Vv: ions of Volume Balance > Output Mode
Controf Functions of Tones (e.g. Reverb)
=
cf
Tone Tuning
1. BASIC EDITING OPERATION
The Display shows several Factors at a time. If necessary, Scroll up
or down the Display to find the Factor to be edited by using the
Scroll Buttons. Then push the Selector Button that is located under
the Factor you wish edit, and the Factor flashes showing that it can
be now edited. To return to the Play mode Display, simply push the
Exit Button.
Joystick Decrement Button
increment Button
Scroll Button Selector Buttons Scroll Button Exit Button
19