Roland D-50 - Page 71

TONE PARAMETERS
(Key Follow Adjustment] :
You can add a further change (=bias level) to the Key Follow
curve, and sect the range (bias range) where the bias ievel is valid.
@The bias range is where the bias level is valid on the keyboard.
It can be set with the bias point (where the bias range begings)
and bias direction (< or >) from <Al to <C7 and from >Al
to >C7 in semi—tone steps.
{e.g.] >C4 : The bias level is only valid on the keyboard above the C4
key. :
<C4 : The bias level is only valid on the keyboard below the C4
key.
@The bias level can be set from —7 to +7, "+" values raise the
. curve, and ”"—” value lower the curve.
(Example]
When set to TVF Key Follow (Cutoff Point) "0"
and Bias renge “>C4”
0 Set Value
oA
t
C4 (Middle C)
*The curve in the picture represents the Key Follow value with the bias
level added.
f. TVF ENV
[Display 31]
I-11 Ut Stra. 1111 Part-1 TUF ENU
Dethie6 Veloif@9 DKF a4 TKF a4
Cee Co
ENV Depth Key Follow (Depth)
Velocity Range Key Follow (Time)
39