Roland D-50 - Page 76

TONE PARAMETERS
(Volume Adjustment) }PCM|
You can change the overall volume of the keyboard (=bias level)
from the set level, and set the range (bias range) where the bias
level is valid.
@The bias range is where the bias level is valid on the keyboard.
It can be set with the bias point (where the bias range begins)
and bias direction (< or >) from <Al to <C7 and from >Al
to >C7 in semi-tone steps.
fe.g.] >C4 : The bias level is only valid on the keyboard above the C4
key.
<C4 =: The bias level is only valid on the keyboard below the C4
key.
@The curve (bias level) can be set from —12 to +0, Lower values
make the curve steeper.
(Example}
When set to <C6.
Volumed
4 (Midatec 6
i TVA ENV
[Dispiay 36}
I-iti1 Ul Strai 1411 Part-1 TVA EHW
Tiles T2186 T3188 T418a TS1 Be
rr rl a a
Time 1 » Time 2 Time 3 Time 4 Time 5
(Display 37]
I-11 Us Stra. iii2 Part-i TVA EMU
Liiea L2i98 L315@ SusLiee Endl1oe
C3 cco
Level 1 Level 2 Level 3 Sustain Level End Level