37
Chapter 4. Recording Your Performance
Stop recording
5
Press the [Play] or [Rec] button.
Recording stops, and the indicators for the [Play] and [Rec] buttons go out.
The performance of the specified part has been recorded.
To record the performance of the other part, go back to Step 2 and repeat the
procedure from there.
You can listen to the performance you recorded already while you record.
Play back the recorded performance
6
Press the [Play] button.
You will hear the recorded performance.
Press the [Play] button once again, and playback will stop.
DP-970_e.book 37 ページ ２００７年１月１６日 火曜日 午後１時４２分
To Next Page
Loading...
