Roland E-50, E-60 - Page 194

MIDI
194
r
E-60/E-50 Music Workstation
(3) Press the [1]~[8] field that corresponds to the MIDI
Set you want to use (the two SELECT button icons
go dark).
You can also select a preset (“SELECT”) and work with
those settings, in which case all eight MIDI Set icons
go dark.
(4) Press the [EXIT] button to return to the main page.
MIDI Set selection at power-on
When you switch on the E-60/E-50, it automatically
selects default MIDI settings. If they do not match the
settings required for your setup, you can tell the E-60/
E-50 which MIDI Set it should recall when you switch it
on:
(1) Press the [MENU] button.
The display changes to:
(2) Press the [UTILITY] field, followed by the [STARTUP]
field.
(3) Press the [MIDI≈SET] field and use the [DATA÷ENTRY]
dial or the [DEC]/[INC] buttons to select the MIDI
Set to be recalled when the E-60/E-50 is switched
on.
(4) Switch on the [RECALL] field.
Switch off this button icon if no MIDI Set should be
recalled when the E-60/E-50 is switched on.
Note: If the E-60/E-50 is also set to recall a User Program that
contains a MIDI link, that selection is ignored if the MIDI SET
[RECALL] button icon is on.
(5) Press the [EXIT] button to return to the main page.
E-60_50_OM_UK.book Page 194 Thursday, June 22, 2006 10:06 AM