EasyManua.ls Logo

Roland EM-55 - Miscellaneous Functions; Factory Initialization

Roland EM-55
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Miscellaneous
56
Functions for educational purposes
The EM-55 provides two functions that may come in handy for music teachers or for those who use the
EM-55 in class:
Deactivating or activating the Demo function
The EM-55’s Demo function can be switched off
so that pressing the [DEMO] button will have no
effect at all. This may be useful in situations
where the EM-55 is used in class. Here is how to
deactivate the Demo function:
(1) Switch off the EM-55.
(2) Hold down the [DEMO] button while
switching the EM-55 back on again.
This setting is remembered, so that next
time you want to listen to a demo song, you
have to repeat the above procedure.
Deactivating the Arranger
Use the following procedure to ensure that the
Arranger cannot be started or stopped:
(1) Switch off the EM-55.
(2) Hold down the [STYLE] button while you
switch the EM-55 back on again.
It will now be impossible to start/stop the
Arranger using the [START/STOP] button, or
to use the SESSION PARTNER buttons
(STYLE PAD & DJ PAD).
Repeat the above procedure when you want
to use the Arranger again.
Deactivating both the Arranger and the Demo function
A third “educational” option is to switch off both
the Demo and the Arranger functions in one go:
(1) Switch off the EM-55.
(2) Hold down the [START/STOP] button while
you switch the EM-55 back on again.
It will now be impossible to start/stop the
Arranger STYLE PAD, DJ PAD, or demo song
playback.
Repeat the above procedure when you want
to use the Arranger and Demo function
again.
Initializing your EM-55 (Factory)
After working extensively with your EM-55, you may want to recall the original factory settings. Note
that the Recorder song and User Program memories will be empty after initializing your EM-55.
Here is how to initialize your EM-55:
(1) Power off your EM-55.
(2) Hold down the [USER PROGRAM/WRITE]
button while turning your EM-55 back on
again.
The message “Factory!” will inform you that
the EM-55 has been initialized.
18. Miscellaneous
EM-55_UK Page 56 Sunday, October 7, 2001 10:16 PM

Table of Contents

Related product manuals