Roland EV-1-WL - Advanced Settings; Memory 1;2 Assign; Wireless Pedal Setting; Looper Setting

32
MEMORY 1 ASSIGN/MEMORY 2 ASSIGN
This selects the applicable memories used when
MEMORY is assigned with TIP/RING.
Press the footswitch to switch between MEMORY 1
and MEMORY 2.
Position Parameter Explanation
MEMORY 1
ASSIGN,
MEMORY 2
ASSIGN
PANEL
Species the panel of the
AC-22LX.
DRY-GRN–
MID SIDE-
ORG
Species each patch.
WIRELESS PEDAL SETTING
This selects the parameters controlled by a wireless
MIDI expression pedal or wireless footswitch
(sold separately).
See “EV-1-WL Connection Guide” (p. 48) for how
to connect the EV-1-WL wireless MIDI expression
pedal.
See “FS-1-WL Connection Guide” (p. 58) for how to
connect the FS-1-WL wireless Footswitch.
LOOPER SETTING
You can select the input signal to be recorded in
the looper and the maximum recording time.