Roland EV-1-WL - Page 52

52
6. Make sure that the Bluetooth indicator
on the EV-1-WL is blinking white.
If the indicator is blinking blue or is lit up white,
operate the device as shown below to make the
indicator blink white.
Blink blue
Quickly press the EV-1-WL’s
[Bluetooth] button twice.
Lit white
The device is connected to a
dierent device (product).
Long-press the [Bluetooth]
button on the EV-1-WL to
disconnect the unit from that
device (product).
7. Press the EV-1-WL’s [Bluetooth] button.
The Bluetooth indicator on the EV-1-WL rapidly
blinks white, and pairing begins.
The Bluetooth indicator on the EV-1-WL stops
blinking and remains lit white when pairing
is nished. The AC-22LX and EV-1-WL are now
connected.