Roland EV-1-WL - Page 80

3
Turn Bluetooth on and o once again
Turn Bluetooth on/o again.
4
Close all apps, and try the procedure again
from step 1 (p. 76)
If you’ve checked 1 – 3 and still cannot connect
to the app, close all apps that are running on your
mobile device.
If the AC-22LX is paired, clear the pairing.
Closing the app
Open the multitask screen, and swipe up
on the app screen.
* The operation for closing an app will
dier depending on the mobile device
that you’re using. Close the app using
the appropriate operation for your
mobile device.
5
Power-o the mobile device and the
AC-22LX unit, and then power them on
again
If you’ve checked
1 – 4 and still cannot connect
to the app, power-o the mobile device and the
AC-22LX, wait for about 10 seconds, and power
them on again.
If the AC-22LX is paired, clear the pairing.
If you’ve checked 1 – 5 and still cannot connect
to the app, contact your dealer or a Roland
customer service center.