Roland F-100 User Manual

19
Playing the Keyboard
■ Changing the Beat
To change the beat, specify the beat by pressing the key (A0–E1) to which
the beat is assigned.
You can select from the following five types: 0 (only upbeat sounds),
2 (2-beat), 3 (3-beat), 4 (4-beat), 6 (6-beat).
fig.02-07
1.
Hold down the [ (Metronome/Rhythm)] button and
press the key to which the beat is assigned.
■ Adjusting the Volume
You can adjust the volume of the metronome and rhythm (p. 20) to any of
five possible levels.
The setting is at “3” when the power is turned on.
fig.02-08
1.
Hold down the [ (Metronome/Rhythm)] button and
press one of the Tone buttons.
The Tone button indicator will blink to indicate the current volume, when
press and hold the [ (Metronome/Rhythm)] button.
It is not possible to change
the beat during song
playback or recording.
MaxMin
Reverb
Volume
StringsOrganE.Piano
Harpsi-
chord Piano
02346
Song
Key Touch Dual Balance
Variation
Song
Key Touch Dual Balance
Var iation Play
1
2
Rec
Recorder
Tra c k
Reverb StringsOrganE.Piano
Harpsi-
chordPiano
12345
Song
Key Touch Dual Balance
Variation
Press
While holding down...
Increase the metronome
volume
F-100.e.book 19 ページ ２００３年８月２９日 金曜日 午前９時４８分

Roland F-100 Specifications

General

Brand	Roland
Model	F-100
Category	Musical Instrument
Language	English