Why is the volume too low from an instrument connected to the input jack of my Roland Musical Instrument?
If the volume level of an instrument connected to the input jack is too low, use a connection cable that does not contain a resistor.
How to reduce thumping sound with headphones on Roland Musical Instrument?
If you hear a thumping sound even with headphones on and the sound muted, and vibration transmitted to the floor or walls is a concern, minimize the vibration by moving the Roland piano away from the wall or using a commercially available anti-vibration mat designed for pianos.
What causes the high-pitched ringing sound in my Roland Musical Instrument?
General| Sound Engine | SuperNATURAL Piano Sound |
|---|---|
| Polyphony | 128 voices |
| Stretched Tuning | On/Off |
| Master Tuning | 415.3 Hz to 466.2 Hz (adjustable in increments of 0.1 Hz) |
| Rated Power Output | 12 W x 2 |
| Keyboard | 88 keys |
| Touch Sensitivity | fixed touch |
| Keyboard Modes | Dual |
| Pedals | Damper, Soft, Sostenuto |
| Effects | Reverb |
| Transpose | -6 to +5 (in semitones) |
| Metronome | Quarter note = 10 to 500 |
| Recorder | 1 part |
| Keyboard Lid | Yes |
| Other Functions | Panel Lock |
| Connectors | DC IN jack |
| Speakers | 12 cm x 2 |
| Control | Volume |
| Accessories | Owner's manual, AC adaptor, Power cord, Music rest |
| Temperament | Equal, Just Major, Just Minor, Pythagorean, Kirnberger, Werckmeister, Arabic, User |
Learn to play the piano, covering sounds, metronome, and duets.
Instructions for playing built-in songs, parts, and recording performances.
Customize piano settings like touch sensitivity, reverb, brilliance, and pitch.
Details on buttons, knobs, and their functions on the front panel.
Explains the function of the Damper, Sostenuto, and Soft pedals.
Details on input/output jacks, MIDI, DC In, and pedal connectors.
Information on using headphone jacks and the headphone hook.
Instructions on how to safely open and close the piano lid.
Steps for powering the unit on and off, including auto-off function.
How to choose different sounds (tones) from the Grand and Ensemble groups.
Instructions on activating and using the metronome for practice.
How to adjust the metronome's tempo and beat settings.
How to activate and cancel the Panel Lock function to prevent accidental changes.
Adjusting the keyboard's touch sensitivity to match playing style.
Applying a reverb effect to simulate a concert hall sound.
Adjusting the tone quality from bright to mellow.
Steps to play a song from internal memory or recorded songs.
How to fast-forward, reverse, stop, and select songs.
Playing songs with either the left or right hand part muted.
Enabling a metronome count-in before a song starts.
Steps to prepare for recording, including metronome and standby mode.
How to start, stop, save, and listen to recorded performances.
Instructions for re-doing or erasing recorded songs.
General procedure for accessing and changing unit settings.
Saving settings so they are remembered after power off.
Adjusting keyboard pitch and tuning to match other instruments.
Using the unit to control visual effects via MIDI and V-LINK.
Explanation of MIDI Visual Control technology.
Avoiding note duplication when using a sequencer.
Resetting all settings to their factory defaults.
Solutions for common problems like no sound, incorrect pitch, or power issues.
Explains various error messages and their meanings.
Details on keyboard, sound generator, speakers, dimensions, and power.
Lists and describes the piano tones available with the Grand button.
Lists and describes tones available with the Ensemble button.
Comprehensive list of all internal songs and their composers.
Important safety instructions to prevent fire, electric shock, or injury.
Guidelines on handling, placement, and environmental considerations.
Notes on power supply, connections, and electrical safety.
Guidelines for unit placement, cleaning, and data management.
Lists all components included in the package for assembly.
Step-by-step instructions for assembling the piano unit.
Information on grounding the unit and precautions for moving it.
To Next Page
