Roland FANTOM-08 - Initializing a Group (INITIALIZE); Exporting a Group as SMF (EXPORT); Saving a Group

How to Create a Group
134134
Initializing a Group
(INITIALIZE)
Here’s how to initialize a group.
1. On the GROUP screen, select [E3] UTILITY.
The GROUP UTILITY screen appears.
2. Use the [E1] knob to select the group that you
want to initialize.
3. Select [E2] INITIALIZE.
The group is initialized.
4. Press the [EXIT] button to return to the GROUP
screen.
Exporting a Group as SMF
(EXPORT)
Here’s how the patterns of a group in the currently selected
scene can be converted into SMF data and exported to a USB
ash drive.
1. On the GROUP UTILITY screen, select [E3] EXPORT.
The SEQ EXPORT screen appears.
2. Make settings in the SEQ EXPORT screen as
described in steps 2–14 of “Exporting a Pattern
as SMF (EXPORT)” (p. 130). In this case, select
“GROUP” as the source.
3. Press the [EXIT] button to return to the GROUP
UTILITY screen.
Saving a Group
The data of the groups you create is saved as a whole in the
current scene. If you want to keep the groups you create, save
the scene (p. 56).