Roland fp-30 - Page 30

MIDI Implementation
30
7015d: Stereo Delay3
This is a stereo delay.
No Parameter Value Description
1
Delay Left
Mode
0–1 ms, note
When this is set to “note,” the
eect is synchronized with
the tempo.
2 Delay Left 0 –127 1–1270 ms
Adjusts the time until the
delay sound is heard. (Hz)
3 Delay Left 0–21 note
Adjusts the time until the
delay sound is heard. (note)
4
Delay Right
Mode
0–1 ms, note
Settings of the Delay Right
The parameters are the same
as for the Delay Left.
5 Delay Right 0–127 1–1270 ms
6 Delay Right 0–21 note
7 Phase Left 0–1
Normal,
Inverse
Phase of the delay sound
8 Phase Right 0–1
9
Feedback
Mode
0–1
Normal,
Cross
Selects the way in which delay
sound is fed back into the
eect.
10 Feedback #1 49–89 0–+80 %
Adjusts the amount of the
delay sound that’s fed back
into the eect.
11 HF Damp 0 –17
200–8000
Hz, Bypass
Adjusts the frequency above
which sound fed back to the
eect is ltered out. If you
don’t want to lter out any
high frequencies, set this
parameter to Bypass.
12 Low Gain 0–30 -15–+15 dB
Gain of the low frequency
range
13 High Gain 0–30 -15–+15 dB
Gain of the high frequency
range
14 Balance #2 0–100
D100:0W–
D0:100W
Volume balance between the
direct sound (D) and the delay
sound (W)
15 Level 0 –127 0 –127 Output level
7015e: Stereo Delay4
This is a stereo delay.
No Parameter Value Description
1
Delay Left
Mode
0–1 ms, note
When this is set to “note,” the
eect is synchronized with
the tempo.
2 Delay Left 0 –127 1–1270 ms
Adjusts the time until the
delay sound is heard. (Hz)
3 Delay Left 0–21 note
Adjusts the time until the
delay sound is heard. (note)
4
Delay Right
Mode
0–1 ms, note
Settings of the Delay Right
The parameters are the same
as for the Delay Left.
5 Delay Right 0–127 1–1270 ms
6 Delay Right 0–21 note
7 Phase Left 0–1
Normal,
Inverse
Phase of the delay sound
8 Phase Right 0–1
9
Feedback
Mode
0–1
Normal,
Cross
Selects the way in which delay
sound is fed back into the
eect.
10 Feedback #1 49–89 0–+80 %
Adjusts the amount of the
delay sound that’s fed back
into the eect.
11 HF Damp 0 –17
200–8000
Hz, Bypass
Adjusts the frequency above
which sound fed back to the
eect is ltered out. If you
don’t want to lter out any
high frequencies, set this
parameter to Bypass.
12 Low Gain 0–30 -15–+15 dB
Gain of the low frequency
range
No Parameter Value Description
13 High Gain 0–30 -15–+15 dB
Gain of the high frequency
range
14 Balance #2 0–100
D100:0W–
D0:100W
Volume balance between the
direct sound (D) and the delay
sound (W)
15 Level 0 –127 0 –127 Output level
7015f: Stereo Delay5
This is a stereo delay.
No Parameter Value Description
1
Delay Left
Mode
0–1 ms, note
When this is set to “note,” the
eect is synchronized with
the tempo.
2 Delay Left 0 –127 1–1270 ms
Adjusts the time until the
delay sound is heard. (Hz)
3 Delay Left 0–21 note
Adjusts the time until the
delay sound is heard. (note)
4
Delay Right
Mode
0–1 ms, note
Settings of the Delay Right
The parameters are the same
as for the Delay Left.
5 Delay Right 0–127 1–1270 ms
6 Delay Right 0–21 note
7 Phase Left 0–1
Normal,
Inverse
Phase of the delay sound
8 Phase Right 0–1
9
Feedback
Mode
0–1
Normal,
Cross
Selects the way in which delay
sound is fed back into the
eect.
10 Feedback #1 49–89 0–+80 %
Adjusts the amount of the
delay sound that’s fed back
into the eect.
11 HF Damp 0 –17
200–8000
Hz, Bypass
Adjusts the frequency above
which sound fed back to the
eect is ltered out. If you
don’t want to lter out any
high frequencies, set this
parameter to Bypass.
12 Low Gain 0–30 -15–+15 dB
Gain of the low frequency
range
13 High Gain 0–30 -15–+15 dB
Gain of the high frequency
range
14 Balance #2 0–100
D100:0W–
D0:100W
Volume balance between the
direct sound (D) and the delay
sound (W)
15 Level 0 –127 0 –127 Output level