MIDI Implementation
36
7020b: Chorus0Flanger
This eect connects a chorus and a anger in series.
No Parameter Value Description
1
Chorus Pre
Delay
0–125 0.0–100.0 ms
Adjusts the delay time from
the direct sound until the
chorus sound is heard.
2
Chorus Rate
Mode
0–1 Hz, note
When this is set to “note,” the
eect is synchronized with
the tempo.
3 Chorus Rate 1–127
0.05–10.00
Hz
Modulation frequency of the
chorus eect (Hz)
4 Chorus Rate 0–21 note
Modulation frequency of the
chorus eect (note)
5
Chorus
Depth
0–127 0 –127
Modulation depth of the
chorus eect
6
Chorus
Balance #1
0–100
D100:0W–
D0:100W
Volume balance between the
direct sound (D) and the
chorus sound (W)
7
Flanger Pre
Delay
0–125 0.0–100.0 ms
Adjusts the delay time from
when the direct sound begins
until the anger sound is
heard.
8
Flanger Rate
Mode
0–1 Hz, note
When this is set to “note,” the
eect is synchronized with
the tempo.
9 Flanger Rate 1–127
0.05–10.00
Hz
Modulation frequency of the
anger eect (Hz)
10 Flanger Rate 0–21 note
Modulation frequency of the
anger eect (note)
11
Flanger
Depth
0–127 0 –127
Modulation depth of the
anger eect
12
Flanger
Feedback
0–98 -98–+98 %
Adjusts the proportion of the
anger sound that is fed back
into the eect. Negative (-)
settings will invert the phase.
13
Flanger
Balance #2
0–100
D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the anger (W)
and the sound that is not sent
through the anger (D).
14 Level 0 –127 0 –127 Output Level