Roland FP-E50 User Manual

44
Placing the FP-E50 on a Stand
Be careful not to pinch your ngers when setting up the stand.
Please use one of the following Roland stands to support your FP-E50: KSFE50, KS-10Z, KS-12 or KS-20X.
Refer to the following when using a stand.
KSFE50
Refer to the KSFE50 Owner’s Manual.
KS-10Z
KS-12
KS-20X
Getting Ready to Play
Adjust the width of the stand so that
the rubber feet on the rear of the piano
fit into the corresponding openings of
the stand
Top view
Adjust the horizontal width
NOTE
For safety, do not use the stand in its very
highest adjustment position.
NOTE
Set the stand height to the second lowest
setting.
Align the center of the Piano with the center of the stand.
Align the front of the Piano
with the front of the stand
Adjust the width of the stand so that
the rubber feet of the Piano straddle
the stand
Top view
Adjust the horizontal width
NOTE
For safety, do not use the stand in its very
highest adjustment position.
Align the front of the Piano
with the front of the stand

Roland FP-E50 Specifications

General

Sound effects	Ambience
Tones quantity	726
Pedals quantity	3
RMS rated power	11 W
Speaker diameter	120 mm
Number of speakers	2
Maximum polyphony (notes)	256
Bluetooth version	4.2
Headphone outputs	1
USB connector type	USB Type-A, USB Type-B
Keys quantity	88 keys
Product color	Black
Tuning frequency	415.3 - 466.2 Hz
Temperament types	Arabic, Equal, Just Major, Just Minor, Kirnberger I, Kirnberger II, Kirnberger III, Meantone, Pythagorean, Werckmeister
Temperaments quantity	10
Power source type	AC
Display resolution	160 x 160 pixels

Weight and Dimensions

Depth	322 mm
Width	1300 mm
Height	174 mm
Weight	17100 g